Language

English

NEWS

Current location:

Homepage

Industry Information

Introduction to the classification of shears

Categories:Industry Information
Author:
Origin:
Time of issue:2020-10-15
Views:0

(Summary description)The main types of shears are as follows: pedal shears, mechanical shears, hydraulic swing shears, electric swing shears, hydraulic guillotine shears, etc.





Introduction to the classification of shears

(Summary description)The main types of shears are as follows: pedal shears, mechanical shears, hydraulic swing shears, electric swing shears, hydraulic guillotine shears, etc.

Categories:Industry Information
Author:
Origin:
Time of issue:2020-10-15
Views:0

Information

Today we come to understand the classification of shears.

The main types of shears are as follows: pedal shears, mechanical shears, hydraulic swing shears, electric swing shears, hydraulic guillotine shears, etc.

The hydraulic shearing machine actually uses a moving (upper blade) and a fixed (lower blade), and uses a reasonable blade gap to apply shearing force to metal sheets of various thicknesses to make the sheets break and separate according to the required size. .

Classified according to the shape of the shearing and bending machine: According to the shape of the scissors, the shearing machine is divided into (straight knife shearing machine) and (disc knife shearing machine).

According to the movement trajectory of the tool post, the shears are classified into the following types according to the movement trajectory of the tool post:

One: The tool post moves along the forward inclination line (the angle between the vertical line is 1°30'～2°), the upper blade section can be processed into a rectangle with four blades, and the cut fracture is basically at right angles to the board surface .

Two: The tool post swings along the arc line. The section of the shear blade should be processed into a diamond shape, so there are only two blades. Since the upper blade is slightly tilted forward during the cutting process, the cutting quality and the tool post are along the forward tilt line The movement is similar.

3: The tool post swings along a circular arc, and the forward inclination angle can reach 300, so the welding groove can be cut out

Scan the QR code to read on your phone

Previous: None

Next: What problems should be paid attention to before starting and during operation of the rolling machine

Previous: None

Next: What problems should be paid attention to before starting and during operation of the rolling machine